Amaze LED bathroom cabinet with Bluetooth audio

Technical Information

Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth 3.0+EDR, or connect directly to the system using a 3.5mm jack plug.

For the audiophiles, the full technical specification of the Bluetooth™ option is

• Bluetooth™ Specification
• Bluetooth™ , 3.0+EDR compliant
• Typical +2dBm Class 2 output power
• Receiver Sensitivity: GFSK typical -90dBm,


• Amplifier Specification
• 0.03% THD+N @10W 4ohm
• 0.1% [email protected] 4ohm
• 0.18% [email protected] 4ohm
• High power
• [email protected] ohm,10% THD+N Vdd=14.6V
• [email protected] ohm,10% THD+N Vdd=13.5V
• [email protected] ,10% THD+ N Vdd+13.5V
• Class-T architecture
• High efficiency
• 88% @12W 8ohm
• 81% @ 20W 4ohm
• Dynamic range=99dB
• Over-current protection
• Over-temperature protection


• Speaker Specification 
• Frequency Response: 105Hz - 18KHz
• Impedance: 4 ohms
• Power: 40W Max


• Cabinet Specification
• Low energy and long-lasting LED white lighting (included)
• Internal 240 volt shaver socket with integral on/off rocker switch.
• Shaver socket can be used with lights off.
• Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink.
• Beautiful Highest Quality Aluminium Chassis.
• Soft close Hinges with easy clip doors.
• Fully adjustable shelf holders.
• LED lighting for cabinet interior
• This cabinet needs to be connected to an earth wire.
• Please ask a professional if you are not capable of fitting yourself.
• The cabinet is in accordance with IP44, CE and RoHS regulations.
• Weight 11kg.